Thanks to the transmission tube – for the first time in monoblock design –, a small focal spot is achieved even with high tube power, so that fast measurements with high resolution can be carried out. The monoblock design of the tube, voltage generator and vacuum generation has been realised in an open design for the first time. This results in both long maintenance intervals and a theoretically unlimited service life. Areas of application include 3D measurements of connectors, plastic housings and covers, 3D printed workpieces, packaging, PET bottles and preforms. The TomoScope® XS (utility model) can also be used for mould correction. The functionality and wear of the tools can be checked based on the measurements on the workpiece. For example, the workpieces are checked for signs of tool chipping and burr formation.

Thanks to the transmission tube – for the first time in monoblock design –, a small focal spot is achieved even at high tube power, so that measurements can be performed 5 times faster compared to conventional CT machines with high resolution

The TomoScope® XS uniquely combines different machine classes

The X-ray source combines the benefits of closed and open microfocus X-ray tubes

Downtimes and operating costs are minimised

Fast amortisation due to low acquisition costs

Local subvoxeling to reduce the probing error

OnTheFly Tomography and real-time reconstruction enable fast measurements

The future-proof concept offers the option of easily upgrading the X-ray voltage and power to 160 kV or up to 80 W at the installation site

Equivalent in design to a full protection device according to the Radiation Protection Ordinance

Standard-compliant calibration according to VDI 2617 for reliable and traceable measurement results, optionally with DAkkS certificate

Design

3D coordinate measuring machine with computed tomography sensors

Measuring range

Max. Workpiece dimensions D = 277 mm / L = 149 mm (depending on the aspect ratio of the workpieces)

Accuracy

Permissible length measurement error up to 4.5 µm

The universal measurement software for coordinate measuring machines with optics, probe, computed tomography and multi-sensor systems

The operation of machines with a wide variety of sensors, as well as the evaluation of volume data and point clouds ...

Comprehensive service around the coordinate measuring machine

Services from initial commissioning, training and maintenance to retrofitting ...